我想经营一个6890 n GC操作员的帮助下知道如何开始测量。系统由GC和探测器单元,以及一个Windows NT软件存在控制它。我们能够开始测量由启动系统和应用等工作的例子。d之后我们可以开始系统是正确的,我们可以看到热探测器获取的数据与我们指定的名字,我们还可以看到2信号住在swoftware但离子谱并不是更新。这是最后确认的错误消息说“无论是GC MS数据收集;查阅日志”。GC信号1和2的更新,但不是总离子和频谱。至少我有两个问题。在数据目录后,我不能看到任何跑。日志,似乎是日志我无法调试och寻找什么是错的。 Also it appears as if there is signal missing somehow. I am not sure if the signal comes from the detector unit or directly from GC, the thing is that on the back I have 3 special connectors, one is called Sampler 1, the other Sampler 2 and one is Tray. There is cable in the Sampler 1, but not Sampler 2, and the Tray is connected to , well the tray of course. Is both the Sampler connectors suppose to be connected, and if so where? I have not been able to find is the Sampler 2 is required, we do not have a cable for it and it was acquired "as is" and so it has been running before.
我怎么能找出为什么我们没有得到离子和光谱信号?我缺少什么?
我知道这些都是旧东西但我舒适与NT系统和了解设备从工程的角度来看,我不知道如何调试/发现问题在这样一个系统,我没有日志文件检查。
J